Avidyne Entegra EXP5000 Instructions d'exploitation télécharger pdf (Page 48)

Using the S-TEC IntelliFlight 2100 Autopilot with the EXP5000

Entegra EXP5000 PFD -42- 600-00157-000 Rev. 06

3.8 Using the S-TEC IntelliFlight 2100 Autopilot with

the EXP5000

If your aircraft is equipped with an S-TEC Intelliflight 2100 Autopilot,

read this section for information on how the EXP5000 operates with

the S-Tec IntelliFlight 2100 autopilot. The following sections describe

the autopilot modes and annunciations supported by the PFD.

IntelliFlight 2100 Autopilot Bugs

The color of Heading, Altitude, or VSI Bugs indicates when the bug is

coupled to the autopilot.

● A solid magenta Heading, Altitude, or VSI Bug indicates that the

bug is coupled to the autopilot.

● A hollow magenta Heading, Altitude, or VSI Bug indicates that

the bug is not coupled to the autopilot.

For more information about the EXP5000 bugs, see Right Buttons

and Knob, on page 19.

IntelliFlight 2100 Autopilot Annunciations

The autopilot annunciations display left to right across the top of the

EXP5000. The color of the annunciated text indicates the mode or

state as follows:

● Green - Active mode

● White - Armed mode

● Amber - Failure state

When a mode fails, both the FAIL message and the failed mode

display in amber. The message alternates between the failed mode

and the word FAIL.

The following table identifies the autopilot messages that can be

annunciated across the top of the PFD. From left to right, the columns

in this table map to fields “in the same location” across the top of the

PFD. For example, any AP Status message will display in the left-

most position and any Trim Status message will display in the right-

most position.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 89 90

Pas de commentaire

Avidyne Entegra EXP5000 Instructions d'exploitation Page 48