Avidyne Entegra EXP5000 Instructions d'exploitation télécharger pdf (Page 37)

Flying with the EXP5000

600-00157-000 Rev. 06 -31- Entegra EXP5000 PFD

HSI will display the appropriate course deviation indicator. The

moving map from the associated GPS will still be displayed.

For more information about the Wind Vector and the HSI moving map

display, see Section 2.3, "EXP5000 Lower Half Display" on page 11

Use the Bearing button to select the Nav source for the blue double-

line bearing pointer. If the selected bearing source is a Localizer, the

bearing pointer does not display.

To take full advantage of the EXP5000, GPS 2 can be loaded with

Direct-To waypoints, alternative flight plans, or Navaid frequencies to

provide additional guidance beyond what is loaded into GPS 1. This

information can be selected for display on the EXP5000 as the

Bearing.

While using the crossfill capability of dual-configured GPS systems is

fully supported and a common technique, it can prevent you from

taking full advantage of the multiple Nav source display capability of

the EXP5000.

For information about loading data into your GPS/VHF unit see the

Pilot’s Guide for your GPS/VHF system.

Note: The CDI on the EXP5000’s HSI comes from the selected Nav source

which may be different from the CDI displayed on the GPS 1 or GPS 2

displays.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 89 90

Pas de commentaire

Avidyne Entegra EXP5000 Instructions d'exploitation Page 37