Avidyne Entegra EXP5000 Instructions d'exploitation télécharger pdf (Page 46)

Using the S-TEC 1500 Autopilot with the EXP5000

Entegra EXP5000 PFD -40- 600-00157-000 Rev. 06

S-TEC 1500 Horizontal Modes

This section describes horizontal and flight director modes supported

by the EXP5000.

● Heading Capture/Hold Mode—Press the Hdg Bug button on the

PFD and rotate the right knob to set a desired heading. Press the

HDG button on the autopilot control head to engage heading

mode. The autopilot will track the input heading. The autopilot

control head will annunciate HDG. Select a new heading at any

time while the autopilot is in heading mode and the autopilot will

track the new heading bug value.

● Nav/Apr Mode—Press the NAV button on the autopilot control

head to engage Nav mode.

■ If the nav source on the PFD is NAV = GPS1 or GPS2, the

autopilot will fly the active flight plan using GPS roll steering

and will annunciate NAV GPSS.

■ If the nav source on the PFD is Nav = VLOC1 or VLOC2, the

autopilot will fly the active VOR or localizer signal.

■ When a localizer is the active Nav source, the autopilot will

automatically transition to APR mode when the localizer is

captured and will annunciate NAV APR.

■ Glideslope capture is supported when the autopilot is in NAV

APR mode and ALT (altitude hold) mode.

Note: The autopilot can be coupled only to a Nav source selected on the

PFD; it cannot be coupled to a Bearing source.

Note: See the S-TEC 1500 faceplate for engaged mode annunciation.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 89 90

Pas de commentaire

Avidyne Entegra EXP5000 Instructions d'exploitation Page 46